View THAT340S_814726.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

T H AT Corporation
FEATURES
* 4 Matched NPN Transistors (300) 4 Matched PNP Transistors (320) 2 Matched NPNs and PNPs (340) 4 Matched NP6N - 4 Matched PNP (380) Monolithic Construction Low Noise - 0.75 nV Hz (PNP) - 0.8 nV Hz (NPN ) High Speed - fT = 350 MHz (NPN) - fT = 325 MHz (PNP) Excellent Matching - 500 mV typical between devices of same gender Dielectrically Isolated 36V VCEO
Low-Noise Matched Transistor Array ICs
THAT 300 Series APPLICATIONS
* * * * * * Microphone Preamplifiers Current Sources Current Mirrors Log/Antilog Amplifiers Multipliers Servos
* *
* * * *
DESCRIPTION
The THAT300 Series ICs are large-geometry monolithic NPN and/or PNP transistor arrays which combine low noise, high speed and excellent parametric matching between devices of the same gender. The large geometries typically result in 25 W base spreading resistance for the PNP devices (30 W for the NPNs), producing 0.75 nV Hz voltage noise (0.8 nV Hz for the NPNs). This makes the 300 Series an ideal choice for low-noise amplifier input stages. Fabricated on a Complementary Bipolar Dielectrically Isolated process, each transistor is electrically isolated from the others by a layer of insulating oxide. The resulting low collector-to-substrate capacitance produces a typical NPN fT of 350 MHz, 325 MHz for the PNPs. This delivers ac performance similar to discrete 2N3904- and 2N3906-class devices. Dielectric isolation also minimizes crosstalk and provides complete DC isolation. Substrate biasing is not required for normal operation, though the substrate should be grounded to optimize speed and minimize inter-device crosstalk. The monolithic construction assures excellent parameter matching and tracking over temperature.
Part Number
THAT300P
Configuration
4-Matched NPN Transistors
Package
DIP14 SO14 DIP14
THAT300S THAT320P 4- Matched PNP Transistors THAT320S THAT340P THAT340S THAT380G 2 Matched NPN Transistors and 2 Matched PNP Transistors 4 Matched NPN Transistors and 4 Matched PNP Transistors Table 1. Ordering Info
SO14 DIP14 SO14 Individual Die
THAT Corporation; 45 Sumner Street; Milford, Massachusetts 01757-1656; USA Tel: +1 508 478 9200; Fax: +1 508 478 0990; Web: www.thatcorp.com
Page 2
THAT300 Series Transistor Arrays
SPECIFICATIONS
1
Maximum Ratings (T A = 25C)
Parameter NPN Collector-Emitter Voltage NPN Collector-Base Voltage NPN Emitter-Base Voltage NPN Collector Current NPN Emitter Current PNP Collector-Emitter Voltage PNP Collector-Base Voltage PNP Emitter-Base Voltage PNP Collector Current PNP Emitter Current Collector-Collector Voltage Emitter-Emitter Voltage Operating Temperature Range Maximum Junction Temperature Storage Temperature Symbol BVCEO BVCBO BVEBO IC MAX IE MAX BVCEO BVCBO BVEBO IC MAX IE MAX BVCC BVEE TA TJMAX TSTORE -45 IC = 1 mAdc, IB = 0 IC = 10 mAdc, IE = 0 IE = 100 mAdc, IC = 0 Conditions IC = 1 mAdc, IB = 0 IC =10 mAdc, IE=0 IE = 100 mAdc, IC = 0 Min 36 36 5 10 10 -36 -36 -5 -10 -10 100 100 0 Typ 40 40 -- 20 20 -40 -40 -- -20 -20 200 200 -- -- 70 150 125 -- -- -- Max -- -- -- Units V V V mA mA V V V mA mA V V C C C
THAT 300
1 2 3 4 5 6 7 SUB SUB 14 13 12 11 10 9 8 1 2 3 4 5 6 7
THAT 320
14 13 12 SUB SUB 11 10 9 8
Q1
Q2
Q1
Q2
Q3
Q4
Q3
Q4
Fig 1. 300 Pinout
Fig 2. 320 Pinout
THAT Corporation; 45 Sumner Street; Milford, Massachusetts 01757-1656; USA Tel: +1 508 478 9200; Fax: +1 508 478 0990; Web: www.thatcorp.com
600041 Rev B
Page 3
SPECIFICATIONS 1 (Cont'd)
THAT 340
1 2 3 4 5 6 7 SUB SUB 14 13 12 11 10 9 8
Q7 E Q3 B Q3 E
GKH YK
Q1 E Q3 C
Q1 B
Q1 C
Q2 C
Q2 B Q4 C
Q2 E
Q1
Q2
Q1 PNP Q3 NPN Q5 NPN Q7 PNP Q5 C Q7 B Q7 C
Q2 PNP Q4 NPN Q6 NPN Q8 PNP
17C1 18B
Q4 B Q4 E
THAT 312
Q5 E Q5 B
Q6 E Q6 B Q6 C Q8 B Q8 E
Q3
Q4
Q8 C
Fig 3. 340 Pinout
Fig 4. 380 Die layout
NPN Electrical Characteristics 2
Parameter NPN Current Gain Symbol hfe Conditions VCB = 10 V IC = 1 mA IC = 10 mA NPN Current Gain Matching NPN Noise Voltage Density NPN Gain-Bandwidth Product Dhfe eN fT VCB = 10 V, IC = 1 mA VCB = 10 V, IC = 1 mA, 1 kHz IC = 1 mA, VCB = 10 V -- -- Min Typ Max Units
60
100 100 5 0.8 350
-- -- -- -- nV % Hz
MHz
NPN DVBE (THAT300: VBE1-VBE2 ;VBE3-VBE4) (THAT340: VBE1-VBE2) VOS IC = 1 mA IC = 10 mA NPN DIB (THAT300: IB1-IB2, IB3-IB4) (THAT340: IB1-VB2) IOS IC = 1 mA IC = 10 mA NPN Collector-Base Leakage Current ICBO NPN Bulk Resistance NPN Base Spreading Resistance NPN Collector Saturation Voltage NPN Output Capacitance rBE rbb VCE(SAT) COB VCB = 25 V VCB = 0 V, 10 mA < IC < 10 mA VCB = 10 V, IC = 1 mA IC = 1 mA, IB = 100mA VCB = 10 V, IE = 0 mA, 100 kHz -- -- -- -- -- -- 500 5 25 2 30 0.05 3 -- -- -- 1500 nA nA pA W W V pF -- -- 0.5 0.5 3 mV mV
NPN Collector-CollectorCapacitance (THAT300: Q1-Q2, Q3-Q4) (THAT340: Q1-Q2) VCC = 0 V, 100 kHz CCC
0.7
pF
1. All specifications subject to change without notice. 2. Unless otherwise noted, TA=25C.
THAT Corporation; 45 Sumner Street; Milford, Massachusetts 01757-1656; USA Tel: +1 508 478 9200; Fax: +1 508 478 0990; Web: www.thatcorp.com
Page 4
THAT300 Series Transistor Arrays
SPECIFICATIONS 1 (Cont'd)
PNP Electrical Characteristics 2
Parameter PNP Current Gain Symbol hfe Conditions VCB = 10 V IC = 1 mA IC = 10 mA PNP Current Gain Matching PNP Noise Voltage Density PNP Gain-Bandwidth Product Dhfe eN fT VCB = 10 V, IC = 1 mA VCB = 10 V, IC = 1 mA, 1 kHz IC = 1 mA, VCB = 10 V -- -- Min Typ Max Units
50
75 75 5 0.75 325
-- -- -- -- nV % Hz
MHz
PNP DVBE (THAT320: VBE1-VBE2; VBE3-VBE4) (THAT340: VBE3-VBE4) VOS IC = 1 mA IC = 10 mA PNP DIB (THAT320: IB1-IB2; IB3-IB4) (THAT340: IB3-IB4) IOS IC = 1 mA IC = 10 mA PNP Collector-Base Leakage Current PNP Bulk Resistance PNP Base Spreading Resistance PNP Collector Saturation Voltage PNP Output Capacitance -- -- 700 7 1800 nA nA -- -- 0.5 0.5 3 mV mV
ICBO rBE rbb VCE(SAT) COB
VCB = 25 V VCB = 0 V, 10mA < IC< 10 mA VCB = 10 V, IC = 1 mA IC = 1 mA, IB = 100 mA VCB = 10 V, IE = 0 mA, 100 kHz
-- -- -- --
-25 2 25 -0.05 3
-- -- --
pA W W V pF
PNP Collector-Collector Capacitance (THAT320: Q1-Q2; Q3-Q4) (THAT340: Q3-Q4) CCC VCC = 0 V, 100 kHz
0.6
pF
Information furnished by THAT Corporation is believed to be accurate and reliable. However no responsibility is assumed by THAT Corporation for it's use nor for any infringements of patents or other rights of third parties which may result from it's use. LIFE SUPPORT POLICY THAT Corporation products are not designed for use in life support equipment where malfunction of such products can reasonably be expected to result in personal injury or death. The buyer uses or sells such products for life suport application at the buyer's own risk and agrees to hold harmless THAT Corporation from all damages, claims, suits or expense resulting from such use. CAUTION: THIS IS AN ESD (ELECTROSTATIC DISCHARGE) SENSITIVE DEVICE. It can be damaged by the currents generated by electrostatic discharge. Static charge and therefore dangerous voltages can accumulate and discharge without detection causing a loss of function or performance to occur. The transistors in this device are unprotected in order to maximize performance and flexibility. They are more sensitive to ESD damage than many other ICs which include protection devices at their inputs. Note that all of the pins (not just the "inputs") are susceptible. Use ESD preventative measures when storing and handling this device. Unused devices should be stored in conductive packaging. Packaging should be discharged to the destination socket before the devices are removed. ESD damage can occur to these devices even after they are installed in a board-level assembly. Circuits should include specific and appropriate ESD protection.
THAT Corporation; 45 Sumner Street; Milford, Massachusetts 01757-1656; USA Tel: +1 508 478 9200; Fax: +1 508 478 0990; Web: www.thatcorp.com
600041 Rev B
Page 5
0.7500.004 (19.050.10)
0.050 (1.27) Typ
0.25.004 (6.350.10)
1
0.060 (1.52) Typ.
0.30 0.02 (7.62 0.5) 0.1250.004 (3.180.10)
0.157 0.245 (3.99) (6.2) Max Max 1 0.018 (0.46) Max 0.344 (8.74) Max 0.069 (1.75) Max
0.018 (0.46) 0.10 Typ. (2.54) 0.075 (1.91)
0.010 (0.25)
0.010 (0.25) Max
Note: qJA = 100 C / W
Note: qJA = 100 C / W
Figure 5. Dual-In-Line Package Outline
Figure 6. Surface-Mount Package Outline
1613u
-477.5
-286.5
-411.5
286.5
THAT 312
477.5
411.5
-95.5
95.5
0
668.5 477.5 286.5
17C1 18B
95.5 0 -95.5
-286.5 -477.5 -668.5
90u
90u
Figure 7. Die dimensions
THAT Corporation; 45 Sumner Street; Milford, Massachusetts 01757-1656; USA Tel: +1 508 478 9200; Fax: +1 508 478 0990; Web: www.thatcorp.com
GKH YK
1232u

▲Up To Search▲

Price & Availability of THAT340S

	To Download THAT340S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .